Mechanisms of cadmium mitigation in tomato plants under orthophosphate and polyphosphate fertilization regimes.

Cadmium (Cd) is one of the most toxic elements in soil, affecting morphological, physiological, and biochemical processes in plants. Mineral plant nutrition was tested as an effective approach to mitigate Cd stress in several crop species. In this regard, the present study aimed to elucidate how different phosphorus (P) fertilization regimes can improve some bio-physiological processes in tomato plants exposed to Cd stress. In a hydroponic experiment, the impact of two phosphorus fertilizer forms (Polyphosphate (poly-P): condensed P-form with 100% polymerization rate and orthophosphate (ortho-P): from orthophosphoric acid) on the photosynthetic activity, plant growth, and nutrient uptake was assessed under three levels of Cd stress (0, 12, and 25 µM of CdCl2). The obtained results confirmed the negative effects of Cd stress on the chlorophyll content and the efficiency of the photosynthesis machinery. The application of poly-P fertilizer significantly improved the chlorophyll stability index (82%) under medium Cd stress (Cd12), as compared to the ortho-P form (55%). The analysis of the chlorophyll α fluorescence transient curve revealed that the amplitude of Cd effect on the different steps of electron transfer between PSII and PSI was significantly reduced under the poly-P fertilization regime compared to ortho-P, especially under Cd12. The evaluation of the RE0/RC parameter showed that the electron flux reducing end electron acceptors at the PSI acceptor side per reaction center was significantly improved in the poly-P treatment by 42% under Cd12 compared to the ortho-P treatment. Moreover, the use of poly-P fertilizer enhanced iron uptake and its stoichiometric homeostasis in the shoot tissue which maintained an adequate absorption of iron under Cd stress conditions. Findings from this study revealed for the first time that inorganic polyphosphate fertilizers can reduce Cd toxicity in tomato plants by enhancing photosynthesis activity, nutrient uptake, plant growth, and biomass accumulation despite the high level of cadmium accumulation in shoot tissues.

A review on phosphorus drip fertigation in the Mediterranean region: Fundamentals, current situation, challenges, and perspectives.

The Mediterranean agricultural sector faces many challenges related to water and mineral resource use for crop production and food security for an exponentially growing population. Phosphorus drip fertigation has recently emerged as an efficient and sustainable technique to improve water and nutrient use efficiency under such challenging pedoclimatic conditions. The classical methods for administering standard P fertilizers to crops (broadcasting and banding) have shown their limitations in terms of P acquisition and use efficiency. More than 60 % of applied P through dry P fertilizers is rapidly transformed into recalcitrant P forms and subsequently lost by soil erosion increasing the effects of P eutrophication issues on the ecosystem's sustainability. The emergence of new advanced irrigation technologies like high-frequent drip irrigation must be accompanied by the development of new P formulations with high water solubility and greater P use efficiency. This review illustrates the state of the art for P fertilizers used in Mediterranean agriculture in the last decades. An overall description is provided for the P fertilizer formulas, their physicochemical properties, as well as their suitability for drip fertigation systems and the consequent effects of their application on photosynthesis, plant growth, and crop productivity. The key factors influencing P fertilizer transformations and use efficiency under drip fertigation systems are extensively discussed in this review with a focus on the differences between orthophosphate and polyphosphate formulations.

Interactive effect of Fe and Mn deficiencies on physiological, biochemical, nutritional and growth status of soybean.

Iron (Fe) deficiency is one of the most common problems of soybean. It causes upper leaves yellowing, interveinal chlorosis, stunted growth and yield loss. Manganese (Mn) deficiency affects the reactions in the oxygen evolving complex (OEC) of photosystem II and increase the accumulation of reactive oxygen species (ROS). The aim of this research is to study the effect of Fe and Mn deficiencies applied separately and simultaneously on physiological, biochemical, nutritional and growth (morphological) parameters of soybean cultivars (Glycine max L.). The experiment was conducted in nutrient hydroponic solution lacking Fe or Mn or both Fe and Mn. Chlorophyll content index (CCI) and chlorophyll a fluorescence were measured through time to detect nutritional disorders at an early growth stage before the apparition of visual symptoms. The results showed that Fe and Mn deficiencies had a significant negative effect on the photosynthetic efficiency, CCI, stomatal conductance, protein content and shoot/root nutrient uptakes. Iron and manganese stress conditions were found to enhance the accumulation of secondary metabolites and increase the antioxidant activity such as total polyphenol content (TPC), malondialdehyde (MDA) and superoxide dismutase (SOD). These impacts were more accentuated when Fe and Mn stress were applied simultaneously than when any of the deficiencies was applied alone. More than that, Mn stress alone did not significantly affect the biomass accumulation. The obtained results showed that, in hydroponic conditions, iron and manganese rational fertilization can improve the studied parameters.

Potassium and phosphorus content ratio in hydroponic culture affects tomato plant growth and nutrient uptake.

Mineral nutrient deficiencies induce a cascade of physiological, morphological, and biochemical changes in plants which reduce vegetative growth. In this work, the impact of P and K concentration levels on tomato plant development grown in hydroponic culture was investigated. Root morphology, chlorophyll a fluorescence, phosphorus (P) and potassium (K) content, and shoot and root biomass were analyzed. Root morphology showed significant differences among the plants grown in hydroponic culture with different concentrations of P and K. Plant root/shoot dry biomass ratio decreased by 22 and 35% for P15K0 and P30K0, respectively, compared to the control (P30K232). The deficiency of P and K (individually or both) reduced significantly the root mass density parameter. For example, root mass density decreased by 38% at P15K0 treatment compared to control. Correlation analysis showed that the P and K content ratio in shoot and root was significantly and positively correlated with root volume. Deficiencies in K and P decreased the relative size of the PSI final electron acceptor pool and the electron flow on the acceptor side of PSI. Tomato growth response depend on the availability of P and K, however, interactions between these two nutrients could influence their uptake and utilization.

Interactive effect of soil moisture content and phosphorus fertilizer form on chickpea growth, photosynthesis, and nutrient uptake.

Water shortage and soil nutrient depletion are considered the main factors limiting crops productivity in the Mediterranean region characterized by longer and frequent drought episodes. In this study, we investigated the interactive effects of P fertilizer form and soil moisture conditions on chickpea photosynthetic activity, water and nutrient uptake, and their consequent effects on biomass accumulation and nutrient use efficiency. Two P fertilizer formulas based on orthophosphates (Ortho-P) and polyphosphates (Poly-P) were evaluated under three irrigation regimes (I1: 75% of field capacity, I2: 50% FC and I3: 25% FC), simulating three probable scenarios of soil water content in the Mediterranean climate (adequate water supply, medium, and severe drought stress), and compared to an unfertilized treatment. The experiment was conducted in a spilt-plot design under a drip fertigation system. The results showed significant changes in chickpea phenotypic and physiological traits in response to different P and water supply regimes. Compared with the unfertilized treatment, the stomata density and conductance, chlorophyll content, photosynthesis efficiency, biomass accumulation, and plant nutrient uptake were significantly improved under P drip fertigation. The obtained results suggested that the P fertilizer form and irrigation regime providing chickpea plants with enough P and water, at the early growth stage, increased the stomatal density and conductance, which significantly improved the photosynthetic performance index (PIABS) and P use efficiency (PUE), and consequently biomass accumulation and nutrient uptake. The significant correlations established between leaf stomatal density, PIABS, and PUE supported the above hypothesis. We concluded that the Poly-P fertilizers applied in well-watered conditions (I1) performed the best in terms of chickpea growth improvement, nutrient uptake and use efficiency. However, their effectiveness was greatly reduced under water stress conditions, unlike the Ortho-P form which kept stable positive effects on the studied parameters.

Chickpea plant responses to polyphosphate fertiliser forms and drip fertigation frequencies: effect on photosynthetic performance and phenotypic traits.

Photosynthesis is the main biophysiological process that governs plant growth and development. Under nutrient deficiency in crops and soils, many photosynthetic reactions can be disturbed. We compared two polyphosphates (Poly-A and Poly-B) and an orthophosphate fertiliser (Ortho-P) to an unfertilised treatment under three drip fertigation frequencies. Results showed that the electron transport chain between PSII and PSI was significantly enhanced in fertigated chickpea plants compared with the control treatment. The polyphosphate fertiliser (Poly-A) enhanced the number of electron acceptors of the photosynthetic linear electron transport chain compared with the other fertiliser forms. Furthermore, the time for reaching the maximum intensity F m was shortened in the fertilised chickpea plant indicating that the rate of light trapping and electron transport was enhanced under phosphorus drip fertigation. Also, the energy needed to close all reaction centres was decreased with P fertigated treatments, as revealed by the electron acceptor pool size of PSII (Sm/tFmax ). However, no significant effects of fertiliser forms or fertigation frequencies were observed on the energetic demand for reaction centres closure. Plants grown under polyphosphate fertigation absorbed significantly more phosphorus. Positive correlations between phosphorus uptake, photosynthetic yield, chickpea podding dynamic, and grain yield showed the beneficial effects of adequate phosphorus nutrition on chickpea growth and productivity.

Interactive effect of potassium and cadmium on growth, root morphology and chlorophyll a fluorescence in tomato plant.

A hydroponic experiment was conducted to evaluate the role of potassium (K) in tomato plant growth exposed to cadmium (Cd) stress. In this work, the effects of three potassium nutrition regimes (155, 232 and 310 ppm of K) combined with Cd at different levels (0, 12 and 25 µM of CdCl2) on chlorophyll content index, root and shoot dry weights, root morphology, chlorophyll a fluorescence and translocation factor were analyzed. The results showed a negative effect of cadmium, at different concentrations, on all these parameters. However, optimization of K nutrition has shown promising results by limiting the negative effect of Cd. A positive effect of the high concentration of K (310 ppm) was observed on leaf chlorophyll content and chlorophyll a fluorescence compared to 232 and 155 ppm under Cd stress. K supply improved the electron transport at PSI side indicated by the increase in the amplitude of the I-P phase of OJIP transient. Also, K at a concentration of 310 ppm significantly reduced Cd translocation from root to shoot and improved root and shoot growth parameters in the presence of Cd. K supplementation can reduce the negative effect of Cd by improving photosynthesis and promoting chlorophyll synthesis. The optimization of nutrients composition and concentration might be a good strategy to reduce the impact of Cd on plant growth and physiology.

Maturation and Conversion of Somatic Embryos Derived from Seeds of Olive (Olea europaea L.) cv. Dahbia: Occurrence of Secondary Embryogenesis and Adventitious Bud Formation.

Maturation and conversion of somatic embryos are two crucial steps that hamper the development of efficient somatic embryogenesis systems in olive. Herein, a simple and efficient protocol for the maturation and conversion of olive somatic embryos is reported. Globular somatic embryos derived from seeds of cv. Dahbia were cultured on either half-strength olive (OM) or olive cyclic embryogenesis (ECO) media, with and without plant growth regulators (PGRs). The embryos reached the cotyledonary stage in 9 weeks, but those cultured on ECO medium containing 0.1 mg·L-1 6-(dimethylallylamino)purine (2iP), 0.1 mg·L-1 6-benzyladenine (BA) and 0.05 mg·L-1 indole-3-butyric acid (IBA) exhibited the largest sizes, with an average of 4.7 mm. Somatic embryo conversion into plantlets was evaluated using different culture media (half-strength OM or one-third strength Murashige and Skoog (MS)), light conditions (light or dark) and desiccation pretreatments. The highest rate of somatic embryo conversion (45%) was observed under a 16 h photoperiod on half strength OM medium containing 0.1 mg·L-1 gibberellic acid (GA3) and 0.1 mg·L-1 1-naphthalene acetic acid (NAA). The embryos that failed to germinate showed either necrosis, cotyledon greening with no further conversion, adventitious bud formation or secondary embryogenesis. The findings of this study will be beneficial for biotechnological applications in olive.